Grizzly Automobile Parts H8088 User Manual

Model H8088  
2-Stage  
Transmission Jack  
Specifications  
Maximum Lifting Capacity .................. 1,100 Lbs.  
Lifting Range ........................................34"–7138  
"
Weight ................................................... 138 Lbs.  
Assembly  
Refer to the parts breakdown on the back of this  
page to understand how the jack is assembled.  
Platform  
Adjustment Knobs  
Operation  
Figure 2. Platform adjustment knobs.  
Pump Control Handle (Figure 1): Point to the  
left to allow the jack platform to lift when pumped.  
Point to the right to lower the jack. (If the jack  
holds a heavy load, turn very slowly to control the  
lowering rate and avoid dropping the load.)  
This jack is designed to assist in transmis-  
sion removal only. Failure to follow these  
instructions when using the transmission  
jack could result in serious personal injury  
or death:  
Foot Pedal Pump (Figure 1): When moved up  
and down, the foot pedal pump lifts the jack plat-  
form.  
1. ALWAYS support the vehicle with appro-  
priately rated support stands before  
using this jack.  
2. Only use this jack on hard level sur-  
faces such as concrete or asphalt.  
3. DO NOT overload this jack beyond the  
maximum lifting capacity. Overloading  
can cause the jack to collapse.  
Pump  
Control  
Handle  
4. DO NOT use this jack to lift or support a  
vehicle.  
5. Keep fingers and hands away from  
pinch points when lowering.  
Pump  
Foot  
Pedal  
6. Only transport load with jack platform  
in the lowered position.  
7. Center the load on the jack for stability  
and use safety chain to secure load.  
Figure 1. Pump controls.  
Platform Adjustment Knobs (Figure 2): Located  
under the jack platform, these knobs allow for pre-  
cision placement and leveling of the platform.  
If you need help with the Model H8088, call our  
Technical Support line at: (570) 546-9663.  
COPYRIGHT © DECEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
#TR8855 PRINTED IN CHINA  
 
H8088 Parts Breakdown and List  
 
 
 
��  
 
 
 
�  
 
 
��  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
REF PART #  
DESCRIPTION  
REF PART #  
DESCRIPTION  
1
PH8088001  
PH8088002  
PN09M  
CASTER  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
PN02M  
HEX NUT M10-1.5  
STEEL BALL 5MM  
SET SCREW M6-1 X 10  
COLLAR  
2
LEG  
PH8088018  
PSS01M  
3
HEX NUT M12-1.75  
4
PLW05M  
LOCK WASHER 12MM  
HEX BOLT M12-1.75 X 70  
PUMP ASSEMBLY  
PH8088020  
PWN02M  
5
PB140M  
WING NUT M8-1.25  
HOOK BOLT  
6
PH8088006  
PH8088007  
PH8088008  
PH8088009  
PR06M  
PH8088022  
PH8088023  
PH8088024  
PH8088025  
PH8088026  
PH8088027  
PH8088028  
PH8088029  
PW01M  
7
PLATFORM ASSEMBLY  
CHAIN  
STUD PIN  
8
ANGLE IRON PIECE  
CORNER METAL PIECE  
EYE BOLT  
9
FOOT PEDAL  
10  
11  
12  
13  
14  
15  
16  
EXT RETAINING RING 16MM  
HALF CIRCLE HANDLE  
FOOT PEDAL PIN 66MM  
HANDLE PIN  
PH8088011  
PH8088012  
PH8088013  
PH8088014  
PB32M  
ANCHOR SHACKLE W/SCREW  
COTTER PIN 3 X 35  
PIN 76MM  
STRAIGHT HANDLE  
HEX BOLT M10-1.5 X 25  
FLAT WASHER 10MM  
FLAT WASHER 8MM  
MACHINE ID LABEL  
FILL BOLT  
PH8088031  
PH8088032  
PW04M  
The machine ID label warns about hazards and ways to prevent injury. The owner of the jack  
MUST maintain the original location and readability of the label. If the label is removed or becomes  
 
����  
�  
��  
 
���  
�  
�  
��  
��  
��  
 

Grizzly Drill G0483 User Manual
Haier Air Conditioner HWF08XC5 User Manual
Hans Grohe Plumbing Product 06104000 User Manual
Harbor Freight Tools Laser Level 92801 User Manual
Harbor Freight Tools Paint Sprayer 93302 User Manual
Harbor Freight Tools Speaker 95953 User Manual
Healthrider Home Gym HREL05983 User Manual
Hoshizaki Dishwasher JWE 2400CUA L 25B User Manual
HP Hewlett Packard Switch 336044 B21 User Manual
Impex Home Gym TT 360 User Manual