Gianni Industries Door RTS 500 User Manual

RTS-500  
Infrared Sensor Exit Device  
Dimension  
RTS-500  
RTS-500N  
86mm  
86mm  
Features  
1. European Sized Face Plate  
2. Infrared, adapts to any environment  
3. 10 cm Proximity Range  
Application  
4. Suitable for any Access Control Units  
5. Emergency Push Button  
Fig. A  
Control Device  
Statement  
Request-to-exit  
input contact  
The RTS-500 Infrared Sensor Exit Device and access  
control package has many different ways of connection, and  
the diagrams below, illustrate two recommended ways of  
connection.  
NC  
Locking Device  
COM  
NO  
Relay output  
control  
12VDC  
In Fig A, the Locking Device was released by connecting the  
Control Device (as Keypad Proximity reader...etc.), RTS relay  
output to 'Request-to-exit input contact' on control device,  
therefore it is better to adjust the RTS relay timer to the  
shortest time.  
+
Fig. B  
In Fig. B, the release time of Locking Device was controlled  
by RTS relay output directly; therefore, the relay time of RTS is  
the release time of Locking Device.  
Locking Device  
(Fail-Safe)  
NC  
COM  
NO  
12VDC  
Specifications  
+
Operating Voltage: DC +12V  
Current Draw: Average 50mA, Peak 60mA @ 12Vdc  
Sensor Range: Up to 10 cm (18% gray reflection)  
Relay Rating: 3A 125VAC/30VDC  
Relay Timer: 0.5, 5,10,20 Seconds.  
Case Material: ABS(UL94V0)  
Operating Temperature: -20~+70C  
Ambient Humidity: 5~95% relative humidity non-condensing  
Visual Signals: Bi-colour LED display with audible Indication  
Warranty  
Relay Timer:  
0.5 seconds  
5 seconds  
The product is warranted against defects in material and  
workmanship while used in normal service for a period of  
1
10 seconds  
year from the date of sale to the original customer. The GEM  
policy is one of continual development and improvement;  
therefore GEM reserves the right to change specifications  
without notice.  
20 seconds  
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-RTS Ver. D Published on 2008.05.16  
 

Earlex Heat Gun HG 1800K User Manual
Earthquake Sound Speaker Kompressor User Manual
Edimax Technology Switch ES 5226RS User Manual
Electro Voice IP Phone ENG 618 User Manual
Electro Voice Stereo Amplifier P 1050 User Manual
Escient Universal Remote EWP 2000 V2 User Manual
Extron electronic TV Cables UTP23SF 4 100 User Manual
Fender Cooktop CS 18 User Manual
Fujitsu Server TX200 User Manual
GE Washer Washers User Manual