Gianni Industries Door 10006S User Manual

10006S Midi Surface  
Water-Proof Electromagnetic Lock  
Regular Installation  
Magnet  
Armature  
(On Power)  
Statement  
Unique Anti-Residual design  
The fail-safe Electromagnetic Lock design with no  
mechanical parts but magnetic force to secure and release the  
doors, suitable for use in areas which required access  
controlled or egress such as exit door.  
When the power is switched off, the holding force will be  
discontinuity and the bolt was installed in armature will pop  
The Electromagnetic Locks are totally sealed in an epoxy  
filled stainless steel case for water-resistant and vandal-  
resistant purpose. A threaded conduit fitting ensures weather  
resistant protection of the wiring therefore it is ideal for indoor  
and outdoor applications, even in severe weather.  
We offers up to 800 pounds holding force with 12V DC  
power input (24V DC or 12/24V DC dual input voltage  
available by special order), and it can be applied with access  
control, and with the full range of optional brackets, it can be  
installed on all type of door frames such as Hollow, Wooden  
door. It is the best choice for electronic security industry and  
system integrators.  
Specifications  
Voltage Tolerance: 15%  
This series of Waterproof Magnetic Lock is made with epoxy  
potting compound and is protected by this compound. Also,  
GEM Waterproof Series Magnetic Locks have been proved to  
Current Draw: 340mA@12Vdc (at temperature 20C)  
(Further notice for diverse input voltage on special order requirement)  
Magnetic bond sensor monitor output (10006S-R)  
(SPDT rated 0.25A@12V DC), remotely monitors the door  
lock or unlock status. (N.C. Output--Door opened; N.O.  
Output--Door closed)  
Operating Temperature: -10~55C (14~131F(  
Humidity: 0~95% non-condensing.  
Lock's surface Temperature (when the power is on):  
)current temperature +20C(  
have withstood  
a
water resistance as established in  
accordance with the test procedures of IPX7, IPX8 through a  
trusted third party. Therefore users need not worry that the  
lock will be rusted or sparked, if the lock is using in outdoor  
applications and installing in confined space where any  
inflammable gas.  
Holding Force: Up to 800 lbs )363 Kg(  
Dimensions:  
Magnet:(L) 216, (W) 52, (D) 30 mm  
Armature Plate:(L) 185, (W) 45, (D) 14 mm  
Special Finishes for magnet and armature plate: Zinc  
Epoxy Potting Compound: E87252 (S), UL94V-0  
Weight )Approx.(: 3.0 Kg  
Warranty  
The product is warranted against defects in material and  
workmanship while used in normal service for a period of  
5
year from the date of sale to the original customer. The GEM  
policy is one of continual development and improvement;  
therefore GEM reserves the right to change specifications  
without notice.  
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-10006S Ver. C Published on 2008.05.12  
 

Eiki Cassette Player 3270A User Manual
Electro Voice Portable Speaker E V Sixteen User Manual
Escali Scale USTT180 User Manual
Everpure Water System EV9100 73 User Manual
Exido Hot Beverage Maker 245 035 User Manual
Extron electronic Projector Accessories PCM 240 User Manual
Fisher Security Camera VDC D2184VA User Manual
Furuno Radar Detector 1942 MARK 2 User Manual
Genie Garage Door Opener 3024 User Manual
GE Washer EWA4600 User Manual