Dynex Headphones DX 28 User Manual

Dynex headset with noise-cancelling microphone • DX-28  
Casque d’écoute avec microphone suppresseur de bruit Dynex  
Auriculares con micrófono con cancelación de ruido Dynex  
Using the headset  
Green  
Installing your headset  
Sound card or  
other sources  
To install your headset  
Plug the green and pink connectors into the  
corresponding ports on your computer.  
Pink  
Testing your headset  
To test your headset  
1. Plug in your headset.  
2. Start the Sound Recorder application (Click Start, then select All Programs, Accessories,  
Entertainment).  
3. Click Record and speak into the headset for 5 – 10 seconds.  
4. Click Stop, then Play. If you can hear your recording through the headset, it is working correctly.  
Adjusting the volume  
You can adjust the volume by turning the volume knob on the headset, or using the Windows volume  
control in the Control Panel. Your computer may also have volume buttons to adjust the Windows  
volume control.  
Troubleshooting  
If your headset does not function correctly, try the following:  
Make sure your headset is properly plugged into the correct ports.  
Make sure the volume is set to a medium level, and is not muted.  
Legal notices  
FCC statement  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used  
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
ICES - Canada’s Interference-Causing Equipment Standards This equipment complies with the applicable technical  
standards of ICES 003:1997 in accordance with the measurement procedures specified in CISPR22-96.  
Copyright © 2007 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services, Inc. Other brands  
and product names are trademarks or registered trademarks of their respective holders. Specifications and features are  
subject to change without notice or obligation.  
One Year Limited Warranty  
Utilisation du casque découte  
Vert  
Installation du casque d’écoute  
Carte son ou  
autres sources  
Pour installer le casque d’écoute  
Branchez les connecteurs vert et rose sur les ports  
Rose  
correspondants de l’ordinateur.  
Test du casque d’écoute  
Pour tester le casque d’écoute  
1. Branchez le casque d’écoute.  
2. Démarrez l’application Sound Recorder [Magnétophone] (Cliquez sur Start [Démarrer] puis  
sélectionnez All Programs [Tous les programmes], Accessories [Accessoires], Entertainment  
[Divertissement]).  
3. Cliquez sur Record (Enregistrer) et parlez dans le casque d’écoute pendant cinq à 10 secondes.  
4. Cliquez sur Stop (Arrêter) puis sur Play (Lecture). Si vous pouvez entendre votre enregistrement en  
utilisant le casque d’écoute, ce dernier fonctionne correctement.  
Réglage du volume  
Vous pouvez régler le volume en tournant le bouton du volume du casque d’écoute ou en utilisant le  
contrôle de volume de Windows dans le Panneau de configuration (Control Panel). Votre ordinateur  
peut également avoir des boutons de réglage du volume.  
Problèmes et solutions  
Si votre casque d’écoute ne fonctionne pas correctement, essayez ce qui suit :  
Vérifiez que le casque d’écoute est connecté correctement sur les ports.  
Vérifiez que le volume est réglé sur un niveau moyen et n’est pas mis en sourdine.  
 

Craftsman Snow Blower 486244283 User Manual
Crane Merchandising Systems Oven Accessories 436 User Manual
Cub Cadet Trimmer ST228 User Manual
Cypress Computer Hardware CY62137FV30 User Manual
Dixon Lawn Mower 18124 106 User Manual
Ducane HVAC Furnace CMPEV050U3 User Manual
Dymo Label Maker v83 User Manual
EverFocus Security Camera EHD363 User Manual
Garland Gas Grill XG24 JIB User Manual
GBC Paper Shredder 7500S User Manual