JVC Cassette Player KS F100 User Manual

CASSETTE RECEIVER  
CASSETTEN-RECEIVER  
RADIOCASSETTE  
RADIO/CASSETTESPELER  
KS-F100  
/I  
ATT  
35WX4  
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
For installation and connections, refer to the separate manual.  
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.  
Pour l’installation et les raccordements, se référer au manuel séparé.  
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende  
handleiding.  
INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
MANUEL D’INSTRUCTIONS  
GEBRUIKSAANWIJZING  
FSUN3030-311S  
[E]  
 
BASIC OPERATIONS  
2
/I  
ATT  
35WX4  
1
DETACHABLE CONTROL PANEL  
SOUND  
KS-F100  
PROG  
LOUD  
MO  
SEL  
Note:  
DISP  
SCAN  
When you use this unit for the  
first time, set the built-in  
clock correctly, see page 13.  
1
2
3
4
5
6
E X  
A M  
F M  
3
2
1
/I  
ATT  
Turn on the power.  
Notes on One-Touch Operation:  
• When you select tuner as a source in step 2 below, the power automatically  
comes on. You do not have to press this button to turn on the power.  
• If the cassette is already in the cassette compartment, tape play starts  
automatically.  
E
X
A
M
F
M
2
Play the source.  
To operate the tuner, see pages 4 – 8.  
To operate the tape deck, see page 9.  
EX (extra) button: To use this button, you need to  
preset your favorite station in advance. For details,  
see pages 6 – 7.  
3
4
Adjust the volume.  
LOUD  
Volume level appears.  
Adjust the sound as you want (see pages 10 – 12).  
To drop the volume in a moment  
Press  
ATT briefly while listening to any source. “ATT” starts flashing on the display, and  
the volume level will drop in a moment.  
To resume the previous volume level, press the button briefly again.  
To turn off the power  
Press  
ATT for more than 1 second.  
Note:  
For security reasons, a numbered ID card is provided with this unit, and same ID number is imprinted on the  
unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.  
3
 
RADIO OPERATIONS  
Listening to the radio  
/I  
ATT  
35WX4  
1
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
3
2
1
2
/I  
ATT  
Turn on the power.  
Note on One-Touch Operation:  
When you select a band in step 2 below, the power automatically comes on.You  
do not have to press this button to turn on the power.  
A
M
F
M
Select the band (FM1, FM2, FM3  
or AM).  
FM1  
FM3  
FM2  
AM  
You can select any one of FM1, FM2, and  
FM3 to listen to an FM station.  
LOUD  
POP  
SOFT  
BEAT  
Note:  
When a cassette is in the cassette compartment, you cannot select the tuner. Be sure  
to eject the cassette from the cassette compartment to listen to the radio.  
3
To search stations of  
higher frequencies.  
Start searching a station.  
When a station is received, searching stops.  
LOUD  
To search stations of  
POP  
SOFT  
BEAT  
lower frequencies.  
To stop searching before a station is received, press the same button you have pressed  
for searching.  
To tune in a particular frequency manually:  
1 Press FM or AM to select the band.  
2 Press and hold  
Now you can manually change the frequency while “M” is flashing.  
3 Press or repeatedly until the frequency you want is reached.  
or  
until “M” starts flashing on the display.  
• If you hold down the button, the frequency keeps changing (in 50 kHz intevals for FM and  
9 kHz intervals for AM — MW/LW) until you release the button.  
4
 
Storing stations in memory  
You can store the broadcasting stations in memory.  
Storing stations manually  
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.  
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band  
/I  
ATT  
35WX4  
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
3
2
1
1
2
F
M
Select the FM1 band.  
LOUD  
POP  
SOFT  
BEAT  
Tune into a station of 88.3 MHz.  
See page 4 to tune into a station.  
LOUD  
POP  
SOFT  
BEAT  
3
1
2
Press and hold the button for more than 1  
second.  
LOUD  
POP  
SOFT  
BEAT  
Preset number “1” flashes for a while.  
4
Repeat the above procedure to store other stations into other  
preset numbers.  
Notes:  
• A previously preset station is erased when a new station is stored in the same preset number.  
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,  
during battery replacement). If this occurs, preset the stations again.  
5
 
Storing your favorite stations into the one-touch  
operation button (EX — extra)  
You can preset an FM or AM station (such as your favorite station or traffic announcement  
station); and recall it by one touch operation even if the unit is turned off.  
EXAMPLE: Storing an FM station of 88.3 MHz into the one-touch operation button (EX)  
/I  
ATT  
35WX4  
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
1
2
1
1
2
Follow the steps 1 and 2 on page 5.  
Press and hold the button for more than 1  
E X  
second.  
“0” flashes on the display, showing that the station has been  
preset.  
LOUD  
POP  
SOFT  
BEAT  
Notes:  
• A previously preset station is erased when a new station is stored.  
• Preset station is erased when the power supply to the memory circuit is interrupted (for example,  
during battery replacement). If this occurs, preset the station again.  
6
 
Tuning into a preset station  
You can easily tune into a preset station.  
Remember that you must store stations first. If you have not stored them yet, see pages 5  
and 6.  
/I  
ATT  
35WX4  
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
EX  
1
2
1
2
A
M
F
M
FM1  
FM3  
FM2  
AM  
Select the band (FM1, FM2, FM3 orAM) you  
want.  
1
2
3
4
5
6
Select the number (1 – 6) for the preset station  
you want.  
To tune in the favorite station  
The unit automatically turns on (if it has been off).  
Your favorite station is tuned in — except when the tape is  
E X  
playing.  
• If you press the button again, the last received station will be  
tuned in.  
7
 
Other convenient tuner functions  
MO  
/I  
ATT  
35WX4  
DETACHABLE CONTROL PANEL  
SOUND  
KS-F100  
MO  
PROG  
LOUD  
DISP  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
SCAN  
Scanning broadcast stations  
When you press SCAN while listening to the radio, station scanning starts. Each time a  
broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes  
on the display), and you can check what program is now being broadcast.  
If you want to listen to that program, press the same button again to stop scanning.  
Selecting FM reception sound  
When an FM stereo broadcast is hard to receive:  
Press MO while listening to an FM stereo broadcast. The sound you hear becomes monaural  
but reception will be improved.  
Lights when receiving an  
FM broadcast in stereo  
LOUD  
LOUD  
MONO  
STEREO  
To restore the stereo effect, press the same button again.  
8
 
TAPE OPERATIONS  
Listening to a tape  
2
3
/I  
ATT  
35WX4  
1
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
/I  
ATT  
1
2
Turn on the power.  
Insert a cassette.  
When one side of the tape reaches its end during play, the  
other side of the tape automatically starts playing. (Auto  
Reverse)  
3
Select the tape direction.  
• Press the both buttons at the same time.  
Each time you press the button, the tape direction changes  
PROG  
alternatively – forward (  
) and reverse (  
).  
To stop play and eject the cassette  
Press 0.  
Tape play stops and the cassette ejects from the cassette compartment.  
You can hear the last received station.  
You can also eject the cassette with the unit turnd off.  
To fast-wind a tape  
Press either ¡ or 1.  
The tape will be wound in the direction of the arrows  
(¡ or 1).  
To restart playback, press ¡ or 1 lightly.  
9
 
SOUND ADJUSTMENTS  
Turning on/off the loudness function  
The human ear is less sensitive to low and high frequencies at low volumes.  
The loudness function can boost these frequencies to produce a well-balanced sound at low  
volume levels.  
Each time you press LOUD, the loudness function turns on/off alternatively.  
LOUD  
LOUD  
Selecting preset sound modes  
You can select a preset sound adjustment suitable to the music genre.  
Each time you press SOUND, the sound mode changes as follows.  
SOUND  
Indication  
For:  
Preset values  
Bass  
00  
Treble  
00  
Loudness  
SCM OFF  
BEAT  
(Flat sound)  
On  
On  
Off  
Off  
Rock or disco music  
Quiet background music  
Light music  
+2  
00  
SOFT  
+1  
–3  
POP  
+4  
+1  
Notes:  
You can adjust the preset sound mode to your preference, and store it in memory.  
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”  
on page 12.  
To adjust only the bass and treble reinforcement levels to your preference, see “Adjusting the sound”  
on page 11.  
• When one of the sound modes is selected, it is shown on the display as follows:  
LOUD  
POP  
SOFT  
BEAT  
For example, when “POP” is selected.  
10  
 
Adjusting the sound  
You can adjust the treble/bass sound and the speaker balance.  
/I  
ATT  
35WX4  
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
2
1
1
SEL  
Select the item you want to adjust.  
Indication  
To do:  
Range  
BAS  
Adjust the bass  
–6 (min.) — +6 (max.)  
(bass)  
TRE  
Adjust the treble  
–6 (min.) — +6 (max.)  
(treble)  
FAD  
(Fader)*  
Adjust the front and rear speaker  
balance  
R6 (rear only) — F6 (front only)  
L6 (left only) — R6 (right only)  
00 (min.) — 50 (max.)  
BAL  
Adjust the left and right speaker  
(Balance) balance  
VOL  
Adjust the volume  
(Volume)  
Note:  
* If you are using a two-speaker system, set the fader level to “00” (center).  
2
Adjust the level.  
Note:  
Normally the + and – buttons work as the volume control buttons.  
So you do not have to select “VOL” to adjust the volume level.  
11  
 
Storing your own sound adjustments  
You can adjust the sound modes (BEAT, SOFT, POP: see page 10) to your preference and  
store your own adjustments in memory.  
1, 4  
/I  
ATT  
35WX4  
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
3
2
2
SOUND  
1
2
Call up the sound mode you want to adjust.  
See page 10 for details.  
Within  
5 seconds  
SEL  
To adjust the bass or treble sound level  
Select “BAS” or “TRE.”  
To turn on or off the loudness function  
Each time you press LOUD, the loudness function turns on  
and off alternatively. (= go to step 4)  
LOUD  
Within  
5 seconds  
3
4
5
Adjust the bass or treble level.  
See page 11 for details.  
Within  
5 seconds  
Press and hold SOUND until the sound mode  
you have selected in step 1 flashes on the  
display.  
Your setting is stored in memory.  
SOUND  
Repeat the same procedure to store other settings.  
To reset to the factory settings  
Repeat the same procedure and reassign the preset values listed in the table on page 10.  
12  
 
OTHER MAIN FUNCTIONS  
Setting the clock  
/I  
ATT  
35WX4  
DETACHABLE CONTROL PANEL  
SOUND  
LOUD  
DISP  
KS-F100  
MO  
PROG  
SEL  
SCAN  
F M  
1
2
3
4
5
6
E X  
A M  
1
2, 3  
4
1
2
SEL  
Press and hold the button for more than 2  
seconds.  
“CLOCK H” or “CLOCK M” appears on the display.  
1.  
1.  
Set the hour.  
1. Select “CLOCK H” if not shown on the  
display.  
2.  
2. Adjust the hour.  
3
Set the minute.  
1. Select “CLOCK M.”  
2.  
2. Adjust the minute.  
Start the clock.  
DISP  
4
To check the current clock time (changing the display mode)  
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.  
During tuner operation:  
During tape operation:  
Clock  
Frequency  
Clock  
Play mode  
13  
 
Detaching the control panel  
You can detach the control panel when leaving the car.  
When detaching or attaching the control panel, be careful not to damage the connectors on  
the back of the control panel and on the panel holder.  
How to detach the control  
panel  
How to attach the control  
panel  
Before detaching the control panel, be sure  
to turn off the power.  
1
Insert the left side of the  
control panel into the groove  
on the panel holder.  
1
Unlock the control panel.  
2
2
Lift and pull the control panel  
out of the unit.  
Press the right side of the  
control panel to fix it to the  
panel holder.  
Note on cleaning the connectors:  
If you frequently detach the control panel, the  
connectors will deteriorate.  
To minimize this possibility, periodically wipe  
the connectors with a cotton swab or cloth  
moistened with alcohol, being careful not to  
damage the connectors.  
Connectors  
14  
 
MAINTENANCE  
To extend the lifetime of the unit  
This unit requires very little attention, but you will be able to extend the life of the unit if you  
follow the instructions below.  
To clean the heads  
• Clean the heads after every 10 hours of use  
using a wet-type head cleaning tape (available  
at an audio store).  
When the head becomes dirty, you may realize  
the following symptoms:  
– Sound quality is reduced.  
– Sound level decreases.  
– Sound drops out.  
• Do not play dirty or dusty tapes.  
• Do not touch the highly-polished head with any  
metallic or magnetic tools.  
To keep the tape clean  
• Always store the tapes to their storage cases  
after use.  
• Do not store tapes in the following places:  
– Subject to direct sunlight  
– With high humidity  
– At extremely hot temperatures  
CAUTIONS:  
• Do not play the tapes with peeling labels; otherwise, they can damage the unit.  
• Tighten tapes to remove slack since loose tape may become entangled with the mechanism.  
• Do not leave a cassette in the cassette compartment after use, as the tape may become slack.  
15  
 
TROUBLESHOOTING  
What appears to be trouble is not always serious. Check the following points before calling a  
service center.  
Symptoms  
Causes  
Remedies  
• A cassette tape cannot be  
inserted.  
You have tried to insert a  
cassette in the wrong way.  
Insert the cassette with the  
exposed tape facing right.  
• Cassette tapes become hot. This is not a malfunction.  
• Tape sound is at very low  
level and sound quality is  
degraded.  
The tape head is dirty.  
Clean it with a head cleaning  
tape.  
• Sound is sometimes  
interrupted.  
Connections are not good.  
Check the cords and  
connections.  
• Sound cannot be heard from The volume control is turned  
Adjust it to the optimum level.  
the speakers.  
to the minimum level.  
Connections are incorrect.  
Check the cords and  
connections.  
• Static noise while listening  
to the radio.  
The antenna is not connected  
firmly.  
Connect the antenna firmly.  
• The unit does not work at  
all.  
The built-in microcomputer  
may function incorrectly due to  
noise, etc.  
While holding SEL, press  
ATT for more than 2 seconds  
to reset the unit. (The clock  
setting and preset stations  
stored in memory are erased.)  
16  
 
SPECIFICATIONS  
AUDIO AMPLIFIER SECTION  
CASSETTE DECK SECTION  
Wow & Flutter: 0.15% (WRMS)  
Fast-Wind Time: 190 sec. (C-60)  
Frequency Response:  
Maximum Power Output:  
Front: 35 watts per channel  
Rear: 35 watts per channel  
Continuous Power Output (RMS):  
50 to 14,000 Hz (± 3dB)  
Front: 15 watts per channel into 4 , 40 Signal-to-Noise Ratio: 52 dB  
to 20,000 Hz at no more than 0.8% Stereo Separation: 40 dB  
total harmonic distortion.  
Rear: 15 watts per channel into 4 , 40  
GENERAL  
to 20,000 Hz at no more than 0.8%  
total harmonic distortion.  
Power Requirement  
Operating Voltage: DC 14.4 volts (11 to 16  
volts allowance)  
Grounding System: Negative ground  
Dimensions (W x H x D)  
Load Impedance: 4 (4 to 8 allowance)  
Tone Control Range  
Bass: ±10 dB at 100 Hz  
Treble:±10 dB at 10 kHz  
Installation Size:  
Frequency Response: 40 to 20,000 Hz  
Signal-to-Noise Ratio: 70 dB  
Line-Out Level/Impedance: 1.0 V/20 kload  
(250 nWb/m)  
182 x 52 x 150 mm  
Panel Size: 188 x 58 x 14 mm  
Mass: 1.3 kg (excluding accessories)  
Design and specifications subject to change  
without notice.  
TUNER SECTION  
Frequency Range  
FM: 87.5 to 108.0 MHz  
AM: (MW) 522 to 1,620 kHz  
(LW) 144 to 279 kHz  
[FM Tuner]  
Usable Sensitivity: 11.3 dBf (1.0 µV/75 )  
50 dB Quieting Sensitivity:  
16.3 dBf (1.8 µV/75 )  
Alternate Channel Selectivity (400 kHz):  
65 dB  
Frequency Response: 40 to 15,000 Hz  
Stereo Separation: 30 dB  
Capture Ratio: 2.0 dB  
[MW Tuner]  
Sensitivity: 20 µV  
Selectivity: 35 dB  
[LW Tuner]  
Sensitivity: 50 µV  
17  
 

Ingersoll Rand Cordless Sander 313A User Manual
JVC CD Player Headunits User Manual
JVC CD Player KD G110 User Manual
JVC Speaker TS C500SPG User Manual
Keating Of Chicago Griddle 055523 User Manual
Keys Fitness Treadmill 73t User Manual
KitchenAid Mixer KV25G0XBU5 User Manual
KitchenAid Range KERC500 User Manual
Korg Electronic Keyboard MMT User Manual
Kramer Electronics Car Stereo System KDS MP1 User Manual